Description

The item is high-quality solar powered type water pump, which is powered by solar energy, no extra power needed, low efficiency, poor stability of similar products and even easier to start than the same power brush pump. It can be used for water cycle, pond fountain, rockery fountain, etc. With eco-friendly design and easy to use, it is really a wonderful water pump for choice.

Features:
- Color: mainly black.
- Shell material: hard plastic.
- and Solar Power Water Pump Garden Fountain Submersible Pump
- Does not need additional and external power supply.
- Eco-friendly design gives you a low carbon consumption life style.
- Decorates your garden if you have a pool or big aquarium.
- Reflesh the air and increase the humidity

Specifications:
solar panel power consumption 7V 1.2W
Solar pannel size: 11cm * 11cm(square)
Brushless pump power consumption :7V 165mA
Max flow quantity of pump : 180L/H
Cable Length:3M
The life time : over 10000 hrs
Delay: less than 3s
Max water height:about 70CM
Color: black

Package Include:
1 * Solar Power Water Pump
5 * Spray Nozzles
1 * User Manual

Note: This pump comes with no power storage function, and its performance depends entirely on the strength of the sunlight. When the sunlight is weak, the water pump will not work continuously, once the sunlight gets strong, the pump will continue to normal work.

PLEASE NOTE: If an item reach you defective or shipping time is out of normal, PLEASE DO NOT OPEN A CLAIM and RETURN, or LEAVE US A BAD FEEDBACK, the best way to solve it quickly is send us a message through ebay and we will give you a 100% fulfillment reply when get on work.

Looking forward to our every cooperation.

Q: Why is the water jet from my solar fountain so low?

A: The water jet height depends on the water depth, sunlight intensity, and installation method. When sunlight is weak, the solar fountain will spray very little water or not at all. If the water is not deep enough, the pump cannot spray water. The fountain must operate at a minimum water depth of 1 inch (2.5 cm). When the sunlight is strong, the water height will be higher.

Q: How often do I need to clean the water pump?

A: The water pump should be cleaned every 2-3 weeks. The cleaning frequency depends on the cleanliness of the water. More sediment or impurities in the water will make the pump more prone to clogging, thus requiring more frequent cleaning.

If the pump is not working, check the following:
Check the pump drain and pipes for kinks and obstructions.
Algae buildup can be rinsed away with clean water.
Remove the pump's front cover and front panel, and clean the rotor, ensuring it is not damaged or jammed.
Check the water level to ensure the pump is completely submerged.

If you hear unusual noises during operation,
remove the pump's front cover and gland to clean the rotor. Grasp the impeller by hand and gently pull the impeller/rotor assembly out of the pump housing for cleaning.
Rinse the impeller/rotor and the internal cavity of the rotor with clean water.

If the product is not working due to lack of power, clean the solar panel or always place it in sunlight.

If the pump does not work or does not dispense water, please:
1. If the pump impeller is clogged with dirt, clean the impeller and filter cover;
2. If the water pipe is clogged, clean it.

To reduce the risk of product damage, it is best to keep the product in clean water and not in other liquids. Never allow the pump to dry out.
Do not use the pump in water above 95 degrees Fahrenheit or 35 degrees Celsius.

Clean the pump with a soft brush or by placing it under running water to remove debris. Keep the water clean and change it regularly to prevent the water from becoming viscous and forming microorganisms.